Follow us:-

12Cr2Ni4A Steel round bar

  • 39 Views
  • 11-May-2024

12Cr2Ni4A Steel round bar is a kind of structural alloy steel round bar and which under GB/T 3077-1988 standard. 12Cr2Ni4A steel round bar has high quality and it has high strength,toughness and good hardenability.
12Cr2Ni4A is widely used for large carburized parts that is to work under high load and alternating stress, such as the high load of all kinds of gear, worm gear, worm, shaft and other mechanical structure.

12Cr2Ni4A Steel round bar chemical composition %:


Grade

Chemical composition %:

C

Si

Mn

P

S

Cr

Ni

Cu

20Cr2Ni4A

0.10-0.16

0.17-0.37

0.30-0.60

≤0.035

≤0.035

1.25-1.65

3.25-3.65

≤0.030

12Cr2Ni4A Steel round bar mechanical properties:


Grade

Mechanical properties:

Tensile strength σb
(Mpa)

Yield strength σ0.2
(Mpa)

Elongation σ5
(%)

reduction of area
ψ (%)

Hardness

Notched bar impact strength
αkv (J/cm2)

min

min

min

min

max

min

12Cr2Ni4A

1080

835

10

50

269HB

71

12Cr2Ni4A steel round bar condition of delivery: heat treatment(Normalizing, Annealing, or high temperature tempering) or do not heat treatment state.


If you have need in 12Cr2Ni4A forged round bar, 12Cr2Ni4A forged square bar, 12Cr2Ni4A forged square bar, 12Cr2Ni4A forged shafts and 12Cr2Ni4A forged blocks. Please contact with us freely. KUNFENG will offer you more than your expect.

Related Post

ASME SA573 Gr 70 carbon and low alloy steel plate on sale

ASME SA573 Gr 70 carbon and low alloy steel plate as the main products in KUNFENG, we have exported the steel plates to countries all over the world. We can provide kinds of ASME SA573 Gr 70 carbon and low alloy steel plate to you

EN10111 DD12 steel work / steel structure / steel machining parts

We keep more than 1000 ton DD12 steel stock , including DD12 steel plate ,DD12 steel pipe , DD12 steel bar and so on . Based on these stock source ,we can produce the DD12 steel work / steel structure / steel machining parts according to your drawing.