Follow us:-

20CrMo steel gears

  • 63 Views
  • 11-May-2024

can be a good machinability and cold plastic strain. KUNFENG as a supplier in china, more information about , please see the following:

Name:
Standard: GB / T 3077-1988
Corresponds to the standard: JIS G4053: 2003 ASTM A29M: 2005 ISO 683-18:1996

20CrMo gear steel chemical composition:

C

Si

Mn

S

P

Cr

Ni

Cu

Mo

0.17~0.24

0.17~0.37

0.40~0.70

≤0.035

≤0.035

0.80~1.10

≤0.030

≤0.030

0.15~0.25

20CrMo gear steel mechanical properties:
Tensile strength σb (MPa): ≥ 885 (90) Yield strength σs (MPa): ≥ 685 (70)
Elongation δ5 (%): ≥ 12 Reduction of area ψ (%): ≥ 50
Impact energy Akv (J): ≥ 78 Impact toughness values ​​αkv (J/cm2): ≥ 98 (10)
Hardness : ≤ 197HB Sample size: Sample size is 15mm rough

Heat treatment and microstructure specifications
Heat treatment specifications: quenching 880 ℃, water, oil cooling ; tempering 500 ℃, water, oil cooling .

20CrMo material belonging to a low-carbon alloy steel for carburizing ; treatment specifications : quenching 880 ℃, water, oil cooling ; tempering 500 ℃, water, oil cooling 20CrMo quenching (860-880 ℃ cold water or oil ) . plus low temperature (150 - 200 ℃) tempered , 20CrMo hardness HRC32-33.

Range gear steel 20CrMo characteristics and application: high hardenability , temper brittleness , very good weldability , cold cracking tendency to form small, can be a good machinability and cold plastic strain . Usually in the quenched state or carburizing used for the manufacture of infiltration in non-corrosive media and working temperatures below 250 ℃, pressure pipe and various fasteners containing nitrogen and hydrogen mixture of media work , more advanced carbon parts, such as gears , shafts , etc.

Related Post

DNV AH36 shipbuilding steel plate

Higher-strength DNV shipbuilding steel comes in 12 grades of 3 strengths, AH36 is one of the grades. TheDNV AH36 shipbuilding steel plates have yield strength of 51,000 psi (355 MPa), and ultimate tensile strength of 71,000 - 90,000 psi (490-620 MPa).

ASTM A283 Gr.C steel works/ steel structures/steel machining parts

This standard ASTM A283/283M covers four grades of carbon steel plates of structural quality for general application. Steel samples shall be melt processed by either open-hearth, basic-oxygen, or electric furnace.

317 Stainless Steel Sheet

Chemical Composition

EN10025-6 S960QL Carbon and Low-alloy High-strength Steel Plate

EN10025-6 S960QL Steel Plate are used in Construction of Bridges, Highway Construction and Other Engineering construction