EN10025-2 S275JR carbon and low alloy steel plate

55 Views
10-May-2024

EN10025-2 S275JR Carbon and low alloy steel plate Delivery Condition: Hot rolled, CR, Normalized, Quenched.KUNFENG is located in shanghai , China, with 15 years of export history. Every year a lot of customers of EN10025-2 S275JR steel plate come here to visit and give a high rating. We want to work with more steel importers of EN10025-2 S275JR steel plate to promote common development. If you are interested in our products please feel free to inquiry of EN10025-2 S275JR steel plate.

EN10025-2 S275JR steel plate Application

Structural application in freight cars, transmission towers, dump trucks, cranes, trailers, bull dozers, excavators, forestry machines, railway wagons and port equipments.

EN10025-2 S275JR Carbon and low alloy steel plate Chemical Composition(max %)

Grade	C%	Si %	Mn %	P %	S %	N %	Cu %
S275JR	0.25	-	1.60	0.045	0.045	0.014	0.60

EN10025-2 S275JR Carbon and low alloy steel plate Mechanical Properties

Grade	Thickness (mm)	Min Yield (Mpa)	Tensile (Mpa)	Elongation (%)	Min Impact Energy
S275JR	8mm-100mm	235Mpa-275Mpa	450-630Mpa	21-23%	20	27J
	101mm-200mm	205-225Mpa	450-600Mpa	19%	20	27J
	201mm-400mm	195-205Mpa	-	-	20	27J
The min impact energy is longitudinal energy

The below is the rolling size of EN10025-2 S275JR carbon and low alloy steel plate by KUNFENG supplied

Thickness	1.2-600mm
Width	1220-4220mm
length	5000-18000mm

EN10025-2 S275JR steel plate can be supplied by KUNFENG. EN10025-2 S275JR steel plate Can be stocked 500 thousand tons every year by KUNFENG. EN10025-2 S275JR steel plate is low carbon, high tensile strength structural steel which can be readily welded to other weldable steel. With its low carbon equivalent, it possesses good cold-forming properties.
EN10025-2 S275JR steel plate is produced by fully killed steel process and supplied in normalized or controlled rolling condition.