ASTM 5115 steel round bar

67 Views
11-May-2024

is a kind of structural alloy steel under the ASTM A29/A29M-04 standard, and it is a common low carbon alloy carburizing steel. ASTM5115 has high cold deformation and plastic,good weldability and good machinability under the condition annealing.

ASTM5115 is used as the carburized parts whose working speed is higher and toughness of section of heart is not large.Such as bushing, crank pin, piston pin, piston ring, coupling, and the working speed is higher circle of gear, CAM, shaft and bearing, etc., ship host with screw, small locomotive parts, steam turbine set of ring, etc.

Chemical composition %:

Grade	Chemical composition %:
Grade	C	Si	Mn	S	P	Cr	Ni	Cu
ASTM5115	0.13-0.18	0.15-0.35	0.70-0.90	≤0.035	≤0.035	0.70-0.90	≤0.030	≤0.030

mechanical properties:

Grade	Mechanical properties:
	Tensile strength σb (Mpa)	Yield strength σs (Mpa)	Elongation δ5/（%）	Percentage reduction of areaψ (%)	Impact AKv(J)	Notched bar impact strengthαkv (J/cm&sup2)	Hardness
	min	min	min	min	min	min	max
ASTM5115	735(75)	490(50)	11	45	55	69(7)	179

details:
1,ASTM5115 specification: DIA 80-1200mm(forged round bar), 80-1200mm(square bar) Length 3-16 meters
2, ASTM5115 heat treatment: Quenching,Annealing,Normalizing and Tempering.
3, ASTM5115 tolerance: 0-+3mm(DIA), 0-+10mm(Length)

Our company, KUNFENG can produce all sizes of ASTM5115 forged steel round bar, ASTM5115 forged square bar, ASTM5115 forged shafts and ASTM5115 forged blocks.

Tags: 4330V, 4161, 4142