S275J2H LSAW steel pipeline according to EN10219.KUNFENG steel is one of the largest S275J2H LSAW steel pipeline manufacturer in China. EN10219 S275J2H LSAW steel pipeline have application as follows:
- Applies to pipe piles in which the steel cylinder acts as a permanent load-carrying member, or as a shell to form cast-in-place concrete piles;
- predominantly used in the construction of chemical plant, vessels, pipe work
and for general mechanical engineering purposes;
- Line pipe for use in pipeline transportation systems in the petroleum and natural gas industries, applies to pipe
EN10219 S275J2H LSAW steel pipeline Specification
Outer Diameter (OD): 457mm-1422mm (16”-56”)
Wall Thickness (W/T): 8mm-50mm
Length (L):5800mm-12300mm
EN10219 S275J2H LSAW steel pipeline Chemical composition(%) Max
Grade |
C |
Mn |
P |
S |
N |
S275J2H |
0.2 |
1.5 |
0.035 |
0.035 |
- |
EN10219 S275J2H LSAW steel pipe Mechanical properties
Grade |
Yield strength |
Energy(J) |
Tensile strength Mini |
Impact temperature |
||
t<=16mm |
t<=16mm |
27 |
>=3mm T<=40 |
T<=40mm |
-20 |
|
S275J2H |
275 |
265 |
430-580 |
410-560 |
Test:Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Metallographic Test, Technical Properties (Bending Test,Charpy-v Impact Test, Hydrostatic Test, X-ray Test, Ultrasonic Test)
Hydrostatic Test Range:Max Length 21 meters; Max Diameter 610mm;
End:Plain end, spigot & socket joint, beveled, cut square, flanged, piling shoes,etc.
KUNFENG steel is provide with satisfied service in professional ways of EN10219 S275J2H LSAW steel pipeline. With good quality and perfect service of EN10219 S275J2H LSAW steel pipeline, we can offer EN10219 S275J2H LSAW steel pipeline.If you have any questions about S275J2H LSAW steel pipeline, pls get contact with us freely.