Follow us:-

JIS G4051 S35C steel works/steel structures/steel machining parts

  • 93 Views
  • 10-May-2024

JIS S35C steel is high quality carbon structural steel. S35C is usually used as mechanical structure after being cut, being grinded, or heat treatment process, etc. It has good plasticity and good strength. It has good performance in processing, and with good weld-ability. S35C steel is usually used in state of normalizing and tempering condition.

Delivery condition of S35C steel

hot rolled, forging, delivery condition with special requirement.

The chemical composition of S35C

C: 0.32-0.38, Si 0.15-0.35, Mn 0.6-0.9, P≤0.03,S≤0.035
Mechanical properties of S35C :
Tensile strength  σb (MPa):≥530(54)
Yield strength  σs (MPa):≥315(32)
Elongation  δ5 (%):≥20
Reduction of areaψ (%):≥45
Impact  Akv (J):≥55
 impact roughness  αkv (J/cm2):≥69(7)
Hardness:≤197HB (without heat treatment)
The tolerance of S35C plate, flat bar and strip should be in accordance with JIS G3194 standard.

S35C steel  Usage

S35C steel is widely used in the manufacture of all kinds of forging and hot pressing, cold drawn and forged steel. It is also used as parts in the production line of seamless steel pipe, used as crankshaft, connecting rod, shaft, shaft pin, leverage, beams, sleeve, rims, washer and screw, nut in machinery manufacturing.
Shanghai KUNFENG is located in Pudong district of Shanghai city. It is only 30 minutes from Pudong International airport to our company. If you have chance to China, we sincerely invite you to visit us. We have five big steel processing centers located in Shanghai City, Tianjin City, Qingdao City, Wuhan City and Nanyang City. Every processing center can process steel material 200,000 tons annually, So we have the capacity to offer the processing like cutting, drilling, wedding, milling, turning, bending, etc. We can provide the S35C steel works/ steel structures/steel machining parts according to your drawings. If you need S35C steel products, please be free to contact us.

Related Post

ASTM A671 CP75 LSAW steel pipeline

ASTM A671 CP75 LSAW steel pipeline Dimensional Characteristics : The applicable wall thickness for this ASTM A671 CP75 LSAW steel pipeline material as defined in the ASTM A671 starts from 8mm to 50mm. And the Outer Diameter of CP75 LSAW steel pipeline ranges to 457mm to 1524mm (16”-56”).

EN10111 DD12 steel work / steel structure / steel machining parts

We keep more than 1000 ton DD12 steel stock , including DD12 steel plate ,DD12 steel pipe , DD12 steel bar and so on . Based on these stock source ,we can produce the DD12 steel work / steel structure / steel machining parts according to your drawing.

EN10111 DD14 steel work / steel structure / steel machining parts

We keep more than 1000 ton DD14 steel stock including DD14 steel plate, DD14 steel pipe and so on . Based on these DD14 steel stock , we can supply many size of DD14 steel structure based on the customer's requirement.

20CrMn hot rolled round bars and forged round bars

20CrMn round bar is the alloy structural round bar under the Chinese standard of GB/T 3077-1988. we promise we can offer you the qualified 20CrMn hot rolled round bars at the competitive price and rapid delivery time.