Follow us:-

API 2H Gr.42/Gr.50 steel work/steel structure/steel machining parts

  • 96 Views
  • 10-May-2024

API 2H Gr.42/Gr.50 steel work / steel structure / steel machining parts

API 2H Gr.42/Gr.50 steel work/steel structure/steel machining parts for use in welded construction of offshore structures,in selected critical portions which must resist impact,
plastic fatigue loading,and lamellar tearing.
API 2H specification covers Gr.42 and Gr.50 two grades of intermediate strength steel plates up to 4in.thick.

API 2H Gr.42/Gr.50 steel plate availability size

Thickness : 1/2" – 4"
Width: 48" – 120"
Length: 96" – 480"

API 2H Gr.42/Gr.50 steel work/steel structure/steel machining parts chemical composition

Element

Gr.42

Gr.50

C max heat analysis

0.18

0.18

Cmax product analysis

0.22

0.22

Mn heat analysis

0.90-1.35

1.15-1.60

P max heat analysis

0.030

0.030

S max heat analysis

0.010

0.010

S max product analysis

0.015

0.015

Si heat analysis

0.05-0.40

0.05-0.40

Si product analysis

0.05-0.45

0.05-0.45

Nb heat analysis

0.04 max

0.01-0.04

Ti

0.020 max

0.020 max

Al heat analysis

0.02-0.06

0.02-0.06

N heat analysis

0.012

0.012

API 2H Gr.42/Gr.50 steel mechanical properties

Property

Gr.42

Gr.50

yield strength,ksi mpa min

 

 

t≤2.5in.

42(289)

50(345)

t>2.5in. 

42(289)

47(324)

Tensile Strength,ksi mpa

62-82(427-565)

70-90(483-620)

2in.(50mm) Elongation,min %

22

21

8in.(200mm) Elongation,min %

18

16

API 2H Gr.42/Gr.50 steel heat treatment

Grade 50 plates over 21/2 inches in nominal thickness that fail to meet the minimum mechanical requirements after normalizing,may be quenched-and-tempered by heating to a temperature between 1500oF(815oC) and 1700oF(925oC) to produce an austenitic structure,holding a sufficient time to attain uniform heat throughout the material,quenching in a suitable medium,and tempering in the range from 1100oF to 1300oF (595oC to 705oC).

API 2H Gr.42/Gr.50 steel work/steel structure/steel machining parts steel service
Heat reatment,Test,Galvanization,pre-treatment,Cutting etc.

Payment Terms: T/T, Irrevocable at sight L/C or 30 % advance payment others by LC

KUNFENGs has developed into a marketing/sourcing and logistic company. For KUNFENG each customer is unique and important. We go beyond match-making to build long term sustainable partnerships. KUNFENG as the API 2H Gr.42/Gr.50 steel work/steel structure/ steel machining parts for offshore platform industry supplier,as long as you have the drawings, we have the ability to provide API 2H Gr.42/Gr.50 steel work/steel structure/steel machining parts for you!

Related Post

31CrMoV9 Hot rolled steel round bar, 31CrMoV9 Forged steelround bar

31CrMoV9 is under JIS G4053-2003 standard. We have more than 750 tons steel bar of 31CrMoV9 round steel bar in stock. More informational about 31CrMoV9 Hot rolled and Forged steel round bar, please see the following.

Grade D Shipbuilding steel plate

Shipbuilding steel Grade D is a common tensile strength steel, ASTM A 131 Grade D steel plate is usual for shipbuilding and oil platform purpose. any need in Grade D shipbuilding steel, please contact us!

18Ni 300 maraged steel forging bar

18Ni 300 maraged steel forging good formability, machinability, good weldability and low thermal expansion coefficient, can better adapt to the alloy application.

90Cr3 alloy structural steel

Henan KUNFENG Co.,Ltd offer 90Cr3 alloy structural steel forged steel round bar and 90Cr3 hot rolled round bar with good quality and fast delivery at best price.