-
Call Now ! 0086-13390692151 -
Email Now sale@kfqizhongji.com
S355NL is a weldable fine grain structural steel grade as per EN 10025-3. S355NL steel is intended for use in heavily loaded parts of welded structures such as, bridges, flood gates, storages tanks, water supply tanks, etc., for service at ambient and low temperatures.
Grade: S355NL
Type: steel plate, weldable fine grain structural steel
Standard: EN 10025-3
Steel Plate Thickness: 2-460mm, Steel Plate Width: 1500-3200mm, Length: 6000-12000mm
Place of Origin: Jiangsu China (Mainland)
Application: Steel structure
S355NL Steel Plate Introduction
S355NL belongs to hot rolled products of structural steels, delivered in normalized or normalized rolled conditions. S355NL is weldable fine grain structural steel, generally used in heavily loaded parts of welded structures such as, bridges, flood gates, storage taks, water supply tanks, etc., for service at ambient and low temperatures.
Regarding to the steel number of S355NL:
S standards for structural steel
355 indicates the minimum specified yield strength for thickness ≤ 16 mm expressed in MPa
N refers to delivery condition
L for the quality with specified minimum values of impact energy at temperatures not lower than -50℃.
S355NL Steel Delivery state: Normalized/ Normalized rolled
S355NL Steel Application
S355NL is weldable fine grain structural steel, generally used in heavily loaded parts of welded structures such as, bridges, flood gates, storage tanks, water supply tanks, etc., for service at ambient and low temperatures.
Please refer to the flowing chemical analysis and mechanical properties to see whether it is suitable for your project.
S355NL steel Chemical Composition Analysis
Grades | C | Si | Mn | P | S | Nb | V | Al | Ti | Cr | Ni | Mo | Cu | N |
max. | max. | max. | max. | max. | max. | min. | max. | max. | max. | max. | max. | max. | ||
S355NL | 0.2 | 0.55 | 0.85-1.75 | 0.03 | 0.025 | 0.06 | 0.14 | 0.015 | 0.06 | 0.35 | 0.55 | 0.13 | 0.6 | 0.017 |
S355NL Mechanical Properties
At ambient temperature for normal thickness ≤ 16 mm.
Grade | Yield Strength | Tensile Strength | Elongation |
MPa(min) | MPa | % (min) | |
S355NL | 355 | 470-630 | 22 |
1 Mpa = 1N/mm2
For plates, strips and wide flats with widths ≥ 600 mm the direction transverse to the rolling direction applies. For all other products the values apply for the direction parallel to the rolling direction.
