-
Call Now ! 0086-13390692151 -
Email Now sale@kfqizhongji.com
S460NL is a weldable fine grain structural steel grade as per EN 10025-3.
S460NL is a weldable fine grain structural steel grade as per EN 10025-3. S460NL steel is intended for use in heavily loaded parts of welded structures such as, bridges, flood gates, storages tanks, water supply tanks, etc., for service at ambient and low temperatures.
Grade: S460NL
Type: steel plate, weldable fine grain structural steel
Standard: EN 10025-3
Steel Plate Thickness: 2-460mm, Steel Plate Width: 1500-3200mm, Length: 6000-12000mm
Application: Steel structure
S460NL Steel Introduction
S460NL belongs to hot rolled products of structural steels, delivered in normalized or normalized rolled conditions. S460NL is weldable fine grain structural steel, generally used in heavily loaded parts of welded structures such as, bridges, flood gates, storage tanks, water supply tanks, etc., for service at ambient and low temperatures.
Regarding to the steel number of S460NL:
S standards for structural steel
460 indicates the minimum specified yield strength for thickness ≤ 16 mm expressed in MPa
N refers to delivery condition
L for the quality with specified minimum values of impact energy at temperatures not lower than -50℃.
S460NL Steel Delivery state: Normalized/ Normalized rolled
S460NL Steel Application
S460NL is weldable fine grain structural steel, generally used in heavily loaded parts of welded structures such as, bridges, flood gates, storage tanks, water supply tanks, etc., for service at ambient and low temperatures.
Please refer to the flowing chemical analysis and mechanical properties to see whether it is suitable for your project.
S460NL steel Chemical Composition Analysis
Grades | C | Si | Mn | P | S | Nb | V | Al | Ti | Cr | Ni | Mo | Cu | N |
max. | max. | max. | max. | max. | max. | min. | max. | max. | max. | max. | max. | max. | ||
S460NL | 0.22 | 0.65 | 0.95-1.80 | 0.03 | 0.025 | 0.06 | 0.22 | 0.015 | 0.06 | 0.35 | 0.85 | 0.13 | 0.6 | 0.027 |
S460NL Mechanical Properties
At ambient temperature for normal thickness ≤ 16 mm.
Grade | Yield Strength | Tensile Strength | Elongation |
MPa(min) | MPa | % (min) | |
S460NL | 460 | 540-720 | 17 |
1 Mpa = 1N/mm2
For plates, strips and wide flats with widths ≥ 600 mm the direction transverse to the rolling direction applies. For all other products the values apply for the direction parallel to the rolling direction.
