Follow us:-
EN10025-6: S690QL, S690QL steel, S690QL steel plate

EN10025-6: S690QL, S690QL steel, S690QL steel plate

S690QL is a hot rolled structural steel, with high yield strength, delivered in the quenched and tempered condition.

Category: Carbon Steel
Hits: 286
Updatetime: 26-Jul-2023

Grade: S690QL

Type: steel plate, high yield strength structural steel plate

Standard: EN 10025-6

Steel Plate Thickness: 3-150mm, Steel Plate Width: 1500-3200mm, Length: 6000-12000mm

Place of Origin: Jiangsu China (Mainland)

Application: Steel structure

S690QL Steel Introduction

S690QL is a hot rolled structural steel, with high yield strength, delivered in the quenched and tempered condition.

The steel name or the steel number of S690QL:

S standards for structural steel

690 indicates the minimum specified yield strength for thickness ≤50mm expressed in MPa

Q for delivery condition of quenched and tempered

L for the quality with specified minimum values of impact energy at temperatures not lower than -400C

S690QL Steel Delivery state: quenched and tempered condition (QT)

S690QL Steel Chemical Composition Analysis

 

Grades

C

Si

Mn

P

S

N

B

Cr

Cu

Mo

Nb

Ni

Ti

V

Zr

max.

max.

max.

max.

max.

max.

max.

max.

max.

max.

max.

max.

max.

max.

max.

S690QL

0.22

0.86

1.8

0.025

0.012

0.06

0.006

1.6

0.55

0.74

0.07

2.1

0.07

0.14

0.17

 

a. Depending on the thickness of the product and the manufacturing conditions, the manufacturer may add to the steel one or several alloying elements up to the maximum values given in order to obtain the specific properties.

b. There shall be at least 0.010% or a grain-refining element present. Aluminum is also one of these elements. The minimum content of 0.010% applies to soluble aluminum, this value is regarded as attained if the total aluminum content is as least 0.013%; in case of dispute the soluble aluminum content shall be determined.   

S690QL Mechanical Properties

Grade

Minimum yield strength ReH

Tensile strength Rm

Minimum

Mpa

Mpa

percentage

Nominal thickness

Nominal thickness

elongation

mm

mm

after fracture

≥3

>50

>100

≥3

>50

>100

%

≤50

≤100

≤150

≤50

≤100

≤150

Lo = 5,65√So

S690QL

690

650

630

770-940

760-930

710-900

14


1MPa=1N/mm2


Related Post

EN10025-3: S355NL, S355NL steel, S355NL steel plate

S355NL is a weldable fine grain structural steel grade as per EN 10025-3. S355NL steel is intended for use in heavily loaded parts of welded structures such as, bridges, flood gates, storages tanks, water supply tanks, etc., for service at ambient and low temperatures.

A302GrA and A302GrB steel plate

A302 Grade B owned tensile strength at 550-690 Mpa. there are different grades A302 Grade A,A302 Grade B,A302 Grade C and A302 Grade D.

EN 10028-3 P460NL1 P460NL2 steel plate/sheet for High Yield Steel

EN 10028-3 P 460 NL1 steel equivalent grade: P 460 NL1 steel plate/sheet is in EN 10028-3 standard, the equivalent material of P 460 NL1 steel is  DIN 17102 T St E 460.

A283 Gr.C steel plate,A283Gr.C steel supplier

A283 Gr.C adopts standard ASTM A283/A283M. A283 steel grade covers four grades in A283 Grade A, A283 Grade B, A283 Grade C, and A283 Grade D of carbon steel plates of structural quality for general application.